Steel Underbody Protection Transmission & Transfer Case Toyota Hilux 7 Vigo

• Toyota

• Hilux 7 N25/N2

Extremely robust protection for your Hilux's transmission and transfer case, made of black steel – Highly effective in securing the main transmission and transfer case from severe off-road damage!

The MorE 4x4 Steel Combination Skid Plate for the Toyota Hilux Vigo (Generation 7) provides high-strength, comprehensive protection for two of your pick-up's most important and expensive mechanical components. While the front section is usually the focus, the entire midsection of the vehicle is subjected to extreme stress in rough terrain, during expeditions, or at work.

The Hilux Vigo is renowned worldwide as an indefatigable workhorse, but when driving over crests, rocky forest paths, hard embankment edges, or massive tree stumps in the undergrowth, the vehicle's midsection is unprotected. If the heavy 4x4 makes hard contact here, cracks or fractures in the main transmission housing and the sensitive aluminum housing of the transfer case are threatened. The actuators for the all-wheel drive can also be damaged. The consequence is immediate oil loss, a total drivetrain failure, and extremely expensive repair costs.

This vehicle-specific combination skid plate perfectly closes this critical safety gap on the underside of your pick-up. Thanks to its thoughtful design, this skid plate can be mounted completely independently and separately, without the need for the remaining plates of the underbody system (such as the front engine guard) to be installed.

🛠️ Important note on variant selection (model years): Please select the appropriate model year for your Hilux Vigo in the selection menu above. The plates differ in their geometry and mounting points for the respective model:

• Model years 2005–2011: For pre-facelift models

• Model years 2011–2015: For facelift models

💡 Important note on product images: To show you the full course of the underbody protection on the vehicle, some photos depict the entire underbody system. The scope of delivery for this item includes only the combined transmission and transfer case skid plate. The other skid plates (such as for the engine or tank) are not included but can be purchased separately in our shop.

Your advantages at a glance:

• Perfectly vehicle-specific: Tailor-made for the Toyota Hilux Vigo (2005–2015) – suitable for all cabin types (Single Cab, Extra Cab, Double Cab) and all engine variants.

• 2-in-1 protection area: Shields both the main transmission (manual or automatic transmission) and the transfer case highly effectively from severe impacts and bottoming out from below.

• Uncompromising steel hardness: Made from 4 mm thick quality steel. For maximum corrosion protection in tough off-road use, the plate is two-layer black powder-coated.

• Easy Plug-and-Play installation: No drilling, cutting, or welding on the vehicle required! The included mounting kit uses only the original factory drilled holes and threads in the robust ladder frame. Reverting to the series condition is possible at any time without problems.

🛠️ Alternative versions in aluminum (6 mm) in the shop:

If you want to save weight, we also offer this combination protection in ultra-robust 6 mm aluminum as a separate item:

• For model years 2005–2011 (Aluminum 6 mm): Item SKU: MO-OPA043

• For model years 2011–2015 (Aluminum 6 mm): Item SKU: MO-OPA028

Technical data:

• Suitable for: Toyota Hilux Vigo (model years 2005–2015, depending on the selected variant)

• Engine: All engine variants (e.g., 2.5 D-4D, 3.0 D-4D)

• Protection area: Main transmission and transfer case

• Material: 4 mm high-strength quality steel

• Surface: Two-layer powder coating, Color: Black

• Mounting: Directly to existing frame points (screw set included)

Scope of delivery:

• 1x Steel combination skid plate (transmission/transfer case)

• 1x vehicle-specific mounting and screw set (Note: Other skid plates visible in the photos for engine or tank are not included and are available separately from us).